The XTX50/DS4 is the same as the XTX50 in terms of performance but uses a different first stage. The DS4 first stage lacks the rotating turret found on the XTX50 first stage and offers one HP port. This compact first stage is a time-proven workhorse that has been embraced by the technical community around the world.
This product qualifies for Free Parts for Life
This compact first stage has four medium-pressure ports and one high-pressure port.
Features an innovative Diver Changeable Exhaust system (DCE). The system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator is supplied with both sets of exhaust tees.
Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However this procedure must ONLY be performed by an APEKS Authorized Service Technician
This model is available with a DIN connection only.
Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.
Suitable for cold water use (below 10 C / 50 F).
Compatible with EAN40 out of the box.
DS4 first stage – no rotating turret.
Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.
Pneumatically-balanced second stage results in smooth, easy breathing.
The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
The large Venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
Easy-to-grip opening effort control knob keeps the diver in control.
The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
A silicone exhaust valve improves the breathing performance of the regulator.
The Comfo-bite mouthpiece virtually eliminates jaw-fatigue.
A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
Connections DIN Only
Type of first stage Over-balanced diaphragm design, environmentally sealed
Body Type Cylindrical
Number of HP ports 1 (7/16" UNF)
Number of MP ports 4 (3/8" UNF)
Environmental Dry Kit Standard
First stage exterior Chrome over marine brass
Orientation Convertible LH or RH
Coldwater Use Yes
Type of second stage Pneumatically balanced
Opening Effort Control Knob Yes
Integrated Venturi Lever Yes
Exhaust tee Diver Changeable - comes with 2 sets
Heat Exchanger for freezing resistance Yes
Hose type Braided Flexi-hose
Overall work of breathing (WOB) scores Avg. 0.70 joules/liter
Nitrox compatible Yes to 40% O2 when new, out of the box / Can be cleaned to 100%